Security Gateway Discussions
Post Reply
Posts: 1
Joined: 26 Oct 2017, 08:40


Post by bedocoman » 26 Oct 2017, 08:43


i have two Internet carrier, one on WAN and the other in the AUX interface. I've setup monitoring and automatic faiolver on the second carrier wich work without problem. The carrier on WAN interface is the default one.
Now I need to setup a VPN, but I wish to use carrier on AUX interface (wich is the standby one).
How can I do this?

please, don't answer "try to..." because i've just tryed a lot of routing scheme without success. So, reply only if you have a working solution.

thanks a lot to all.

anders s
Posts: 36
Joined: 27 Sep 2011, 14:41

Re: Routing

Post by anders s » 30 Oct 2017, 12:53

Create a secondary routing table that only has the default route for aux, set "outbound routing table" on the ipsec interface to the secondary routing table

Posts: 697
Joined: 10 Apr 2008, 14:14
Location: Clavister HQ - Örnsköldsvik

Re: Routing

Post by Peter » 31 Oct 2017, 16:56

Impressive, i would not have been able to describe the solution with only one line :mrgreen:


Post Reply