How do I setup a Clavister Security Gateway for remote admin

FAQ's for older versions of CorePlus/cOS Core
Locked
jono
Posts: 85
Joined: 18 Apr 2008, 10:46
Location: Clavister HQ - Örnsköldsvik

How do I setup a Clavister Security Gateway for remote admin

Post by jono » 18 Apr 2008, 14:05

This FAQ applies to:
  • Clavister Security Gateway version 8.xx
Question:
How do I setup a Clavister Security Gateway for remote administration?

Answer:
First you add a rule under the Remotes-section, where you specify the external interface of the SGW and which Network / IP-address that you wish to allow to admin the SGW.

This will allow FineTune to communicate with the SGW. Also notice that the communication is encrypted, and that you will need the right set of encryption keys to be able to connect to the SGW.

Note: If you are not using NetconBeforeRules, which is set by default, in Advanced Settings->RemoteAdmin, you have to add a rule to the Rules-section, which allows you to talk UDP & TCP to port 999 of the SGW's external IP-address. It might look something like this:
Clavister_remote_administration.jpg
Clavister_remote_administration.jpg (20.63 KiB) Viewed 3144 times

Locked