Running Clavister on DELL PE2950

Clavister CorePlus hardware compatibility guides and discussions.
Post Reply
Posts: 659
Joined: 10 Apr 2008, 14:14
Location: Clavister HQ - Örnsköldsvik

Running Clavister on DELL PE2950

Post by Peter » 12 Dec 2008, 08:37


Thought i'd share some customer feedback about this particular hardware and running Clavister on it.
  • CorePlus doesn’t detect the 2xBroadcom NeXtreme-II and 2x Intel e1000 interfaces. We manually select drivers for the 2xIntel cards, and select Intel interface as management interface. We add Broadcom interfaces and select drivers via Finetune.Caution : don’t use the Broadcom interfaces as management interface at setup even if you select bne2 drivers because the core will reboot.
We have not tested this particular hardware ourselves, but i hope the above information will be of use.

Thanks to Rachid at Netpaq for this information.

Best regards

Posts: 1
Joined: 24 Dec 2008, 11:52

Re: Running Clavister on DELL PE2950

Post by Barbara » 26 Dec 2008, 05:42

Hi friend, this was a nice information, thanks for sharing!

Posts: 1
Joined: 25 Aug 2009, 10:10

Re: Running Clavister on DELL PE2950

Post by panasonic » 25 Aug 2009, 10:15

Thanks to the article, Now there is more reason to comment than ever before! Everyone should participate. I am incorporating what your wrote to our project!
Great little article. :action_goto:
comparatif simulation taux credit auto - Taux crédit auto. Comparatif des offres! Les meilleurs taux crédit auto sont sur le net !comparatif simulation taux credit auto

Post Reply