One Connect URI as a profile selector

Post your thoughts and suggestions here!
Post Reply
kgtyroll
Posts: 3
Joined: 10 May 2009, 22:00

One Connect URI as a profile selector

Post by kgtyroll » 18 Feb 2022, 12:57

Hi

For Cisco AnyConnect it is possible to create URI differences to separate types of group settings - is this possible to implement in One Connect as well? It could be the desire to assign separate IP subnets for the clients, create different types of split tunnels - or the possibility to create both split and full tunnels... like:

https://sub.domain.tld/full = full tunnel configuration
https://sub.domain.tld/split = split tunnel configuration

The local rules can be used for creating policies for groups of users, but if the traffic is forwarded to other sites it could be preferred to separate the users on subnets.
(Question - is is possible to assign users IP and other settings via RADIUS?)


Best regards
Kaare

Post Reply