Serial console problem on the Clavister S140, S240 or SG200

How to's for older versions of CorePlus
Post Reply
jono
Posts: 85
Joined: 18 Apr 2008, 10:46
Location: Clavister HQ - Örnsköldsvik

Serial console problem on the Clavister S140, S240 or SG200

Post by jono » 22 Apr 2008, 10:54

This FAQ applies to:
  • Clavister S140, S240 and SG200 Series
    Hyper Terminal
By having HyperTerminal connected to the Security Gateway and power it on, and when it gets to the "Select Management Interface" menu as described in the Getting Started document. However, at this point nothing happens no matter what. No input seems to work.

Symptom:
The bootmenu does not take input from the console when using Hyper Terminal.

Solution:
The solution seems to be to use Tera Term instead.

Post Reply