Switching quad card.

Security Gateway Discussions
Post Reply
matblo

Switching quad card.

Post by matblo » 07 Jul 2009, 12:44

When we replace an old quad card in a software release of Clavister, only one of the firewalls 6 interface works. All interface but the internal shows ”Null (sink)” on the interface type in ifstat (Even on an existing interface that is not changed). But the new model type is printed, so it seems to have found the new card (Intel).

Do i have to activate the card in Clavister?

//Mattias

mattias
Beta Tester
Posts: 28
Joined: 14 Apr 2008, 21:34
Location: Örnsköldsvik
Contact:

Re: Switching quad card.

Post by mattias » 08 Jul 2009, 14:31

If you changed from for example a Dlink card to an Intel card you need to change driver for the cards, you do this from FineTune, under Interfaces->Ethernet.

himi
Posts: 1
Joined: 08 Jul 2009, 13:13

Re: Switching quad card.

Post by himi » 22 Jul 2009, 14:11

Despite the fact we are running version 9.10.00 ?

Regards Himzo

Nick
Posts: 70
Joined: 10 Apr 2008, 09:42
Location: Clavister HQ - Örnsköldsvik

Re: Switching quad card.

Post by Nick » 27 Jul 2009, 08:32

No, as of version 9.00 you should run the following command in the console:
pciscan -cfgupdate
Don't forget to activate and commit the changes made.

Regards,
Niklas
Nick
Clavister, Sweden

Post Reply