Hello
Where is the logs for IPsec? I want to look at previuos attempts on setting up tunnels, IKE, Phase1 and 2.
Best Regards
Christer
Logs for IPsec
Re: Logs for IPsec
Hello.
Information about IPsec tunnel establishment can be found in primary two places.
1. Normal logs
1.1 Such as in the WebUI memory logs or if you have setup a log receiver for Syslog (e.g. InCenter) or our own log format using InControl.
2. The "ike -snoop <ip>" CLI command.
Logs from #2 is recommended as it shows a greater level of detail about what is happening.
The following How-To may also be of interest when troubleshooting IPsec related problems:
viewtopic.php?f=8&t=3699
Best regards
/Peter
Information about IPsec tunnel establishment can be found in primary two places.
1. Normal logs
1.1 Such as in the WebUI memory logs or if you have setup a log receiver for Syslog (e.g. InCenter) or our own log format using InControl.
2. The "ike -snoop <ip>" CLI command.
Logs from #2 is recommended as it shows a greater level of detail about what is happening.
The following How-To may also be of interest when troubleshooting IPsec related problems:
viewtopic.php?f=8&t=3699
Best regards
/Peter