IPSec tunnel - multiple interfaces

Security Gateway Discussions
Post Reply
penava
Posts: 2
Joined: 17 Aug 2019, 18:58

IPSec tunnel - multiple interfaces

Post by penava » 17 Aug 2019, 19:10

I need some help on configuration

There are two sites,

site A uses 192.168.15.0/24 lan subnet

site B has two subnets

VLAN1: 172.20.100.0/24
VLAN2: 192.168.30.0/24.

From 192.168.30.0/24 should be able to access 192.168.15.0/24. IPSec tunnel is created and works well.

From 172.20.100.0/24 should use tunnel to access internet.

I created two tunnels (one between 192.168.30.0/24 - 192.168.15.0/24 and the other between 172.20.100.0/24 - 0.0.0.0/24 ) , separate routing tables they seems to be established, but if both is up one is not working (only the last one activated works and forwards traffic).

What do i do wrong, how this scenario is to be configured?

penava
Posts: 2
Joined: 17 Aug 2019, 18:58

Re: IPSec tunnel - multiple interfaces

Post by penava » 19 Aug 2019, 16:17

Solved... i created IP adress group, with this two subnets and set the group as source net on IPSec object. Works as expected.

Post Reply